White Euro 4 Light Duty Sinotruk Howo 5 Cbm Mini Concrete Mixer Truck

Whats is Howo 5cbm Concrete Mixers Truck?

Howo 5cbm Concrete Mixers Truck is a special truck used to transport concrete for construction; because of its shape, it is often called a snail truck or olive truck. This type of truck is equipped with a cylindrical mixing drum to carry the mixed concrete.

During transportation, the mixing drum will always be kept rotating to ensure that the carried concrete will not solidify. After the concrete is transported, the inside of the mixing drum is usually washed with water to prevent the residual concrete from hardening and occupying space, so that the volume of the mixing drum becomes less and less.

Euro 4 Light Duty Howo 5 Cbm Concrete Mixers Truck

Maintenance of Howo 5 Cbm Concrete Mixers Truck

Because concrete will solidify into a hard block in a short time and is corrosive to steel and paint, it is necessary for daily maintenance to wash the concrete adhering to the concrete storage tank and the inlet and outlet after each use of the concrete storage tank. Serious work. These include:

a. Rinse the feed port with water before each filling to keep the feed port moist during loading;

b. Fill the washing water tank that comes with the car with water while loading;

c. Rinse the feed port after loading, and wash the remaining concrete near the feed port;

d. After unloading at the construction site, rinse the discharge tank, and then add 30-40L of cleaning water to the concrete storage tank; keep the concrete mixing tanker concrete storage tank forward and slowly rotating when the vehicle returns;

e. Remember to drain the sewage in the concrete storage tank before loading the next time;

f. Thoroughly clean the concrete storage tank and around the material inlet and outlet at the end of the day to ensure that there is no cement and concrete agglomeration.

As long as these tasks are not carried out seriously once, they will cause great troubles in future work.

Operation of Sinotruk Howo 5 Cbm Concrete Mixers Truck

1. All parts of the mechanical system should be carefully inspected before starting, and it can be started after confirming that it is good.

2. Before starting, place the mixing joystick in the "neutral" position.

3. After starting, place the mixing joystick in the "discharge" position and remove the water in the drum.

4. When loading, the stirring lever should be placed in the "loading" position.

5. Before transportation, the unloading trough must be fixed in the "driving" position to prevent swinging.

6. When operating the joystick, you should stay in the "neutral" position for a while before moving to the next position.

7. do a good job in civilized construction, and the excess materials in the barrel are not allowed to fall randomly. After unloading, the mixing drum, trough, roller and other parts must be cleaned.

8. When a person enters the cylinder to remove the concrete agglomeration, the vehicle should be turned off, the switch key should be removed, and the outside of the cylinder should be supervised.